ECUFLASH....

[Anders_WR1]

Anybody had any involvement? or know anybody who uses it?

All software is free to download from what I can see,you just need to buy a cable that runs between your ECU and laptop.

Been reading lots about it and it seems that most tuners"may"start using this software at a reduced rate to the ECUTEK mapping at 550 a pop!!!

I met up with some people at teh weekend and did some logging on teh evo-seems the "mapping" received is identical to the map somebody got at WRC!!! Basically just up the boost!!
The cars are also running VERY "rich"even after the "re-map"

No alterations to fuelling or the MIVEC where there are apparently alot of gains to be had. I was also advised that this is a better way of doing things and a boost controller is not essential as the current ECU can cope with dealing with the boost!!

The chap in question has downloaded maps from alot of vehicles including the latest 360 which is running 1.65-1.7bar boost!!

Apparently the MIVEC has been remapped on 360 to come on boost earlier and increase mid range torque!

The boost can be lowered to 1.3 to get the results we currently have @ 380bhp!! so therefore running 1.5bar should be able to see well up into the 400 figures!!! And so far NO issues!!!

Seems we are sold alot of items by tuners that are not essential,so that they can do very little work with the biggest financial rewards(i think we all knew this anyway).

Im very tempte to get the hardware/cables and have a good look into what I can do with the EVO.
Also availible for the scoob.

I will be chatting to the above fella a bit in the near future and I feel and will be trying to get my head around this before I attempt blowing up the EVO

I thought this was a WR1 forum, lol

I got my car mapped by Rich at Powerstation. I think it cost

[Scooby Lee]

Spike,

The laptop has arrived and I'm currently configuring it! (Norton Internet Security 2007 is being troublesome )

For info:

I bought the 'universal' lead, which means I'll be able to 'plug-into' Subarus and Mitsubishis.

...Just awaiting delivery!

Lee.

[SPIKE LIKE MIKE]

Anybody had any involvement? or know anybody who uses it?

All software is free to download from what I can see,you just need to buy a cable that runs between your ECU and laptop.

Been reading lots about it and it seems that most tuners"may"start using this software at a reduced rate to the ECUTEK mapping at 550 a pop!!!

I met up with some people at teh weekend and did some logging on teh evo-seems the "mapping" received is identical to the map somebody got at WRC!!! Basically just up the boost!!
The cars are also running VERY "rich"even after the "re-map"

No alterations to fuelling or the MIVEC where there are apparently alot of gains to be had. I was also advised that this is a better way of doing things and a boost controller is not essential as the current ECU can cope with dealing with the boost!!

The chap in question has downloaded maps from alot of vehicles including the latest 360 which is running 1.65-1.7bar boost!!

Apparently the MIVEC has been remapped on 360 to come on boost earlier and increase mid range torque!

The boost can be lowered to 1.3 to get the results we currently have @ 380bhp!! so therefore running 1.5bar should be able to see well up into the 400 figures!!! And so far NO issues!!!

Seems we are sold alot of items by tuners that are not essential,so that they can do very little work with the biggest financial rewards(i think we all knew this anyway).

Im very tempte to get the hardware/cables and have a good look into what I can do with the EVO.
Also availible for the scoob.

I will be chatting to the above fella a bit in the near future and I feel and will be trying to get my head around this before I attempt blowing up the EVO

I thought this was a WR1 forum, lol

I got my car mapped by Rich at Powerstation. I think it cost

[SPIKE LIKE MIKE]

Spike,

The laptop has arrived and I'm currently configuring it! (Norton Internet Security 2007 is being troublesome )

For info:

I bought the 'universal' lead, which means I'll be able to 'plug-into' Subarus and Mitsubishis.

...Just awaiting delivery!

Lee.

Top bannana

I will be able to forward my maps to you next weekend if all goes well.

You can be "spikes engineer" and check them out for me Will be interested to do a RR shortly after the maps also if anybody is interested.

I cut the side out of teh airbox today so I will give it a good beasting tommorow to see if there is any difference

[Anders_WR1]

Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve

[SPIKE LIKE MIKE]

Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve

Thought so-Ive just cut a large hole in my airbox and hope to hear the Recirc DV when it re-circs-Also hoping for some induction noise

[Anders_WR1]

Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

[SPIKE LIKE MIKE]

Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

Only ever used WRC(silverstone) and Engine Advantages in Essex with the mitsi.

May pay a visit to WRC early march if you fancy it?

[Anders_WR1]

Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

Only ever used WRC(silverstone) and Engine Advantages in Essex with the mitsi.

May pay a visit to WRC early march if you fancy it?

WRC sounds good. Give us a PM with the date. I could ask a few mates as well? Various cars - Evo VI, S2000, GTI-R

Cheers

Anders

[danr55]

Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve

Thought so-Ive just cut a large hole in my airbox and hope to hear the Recirc DV when it re-circs-Also hoping for some induction noise

Let us know what difference this makes

[SPIKE LIKE MIKE]

Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve

Thought so-Ive just cut a large hole in my airbox and hope to hear the Recirc DV when it re-circs-Also hoping for some induction noise

Let us know what difference this makes

Great induction noise-very like the APS induction on the scoob-not quite as loud! You get a nice swoooosh as it sucks adn sounds like its a VTA valve on lift off-I LIKE IT

[SPIKE LIKE MIKE]

Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

Only ever used WRC(silverstone) and Engine Advantages in Essex with the mitsi.

May pay a visit to WRC early march if you fancy it?

WRC sounds good. Give us a PM with the date. I could ask a few mates as well? Various cars - Evo VI, S2000, GTI-R

Cheers

Anders

Will put up in events....

[Scooby Lee]

Great induction noise-very like the APS induction on the scoob-not quite as loud! You get a nice swoooosh as it sucks adn sounds like its a VTA valve on lift off-I LIKE IT

Some pictures would be nice!

[SPIKE LIKE MIKE]

Great induction noise-very like the APS induction on the scoob-not quite as loud! You get a nice swoooosh as it sucks adn sounds like its a VTA valve on lift off-I LIKE IT

Some pictures would be nice!

Gimme 5 mate....

[SPIKE LIKE MIKE]

Not very clear but hopefully you get teh idea....

Only cut out on the wing side so that no hot air from rad etc gets in the box,Ive seen them with the hole cut ALOT larger....

[Scooby Lee]

Don't you have Auto-Focus!

Thanks...I must buy myself an airbox lid that I can modify without fear of making a serious error!

[SPIKE LIKE MIKE]

Don't you have Auto-Focus!

Thanks...I must buy myself an airbox lid that I can modify without fear of making a serious error!

Dremmel - cant go wrong -

Or drill 3 holes to act as corners of triange and hand cut with a hack saw blade.
The likes of John banks have completely cut out the top of the lid . Apparently 80% of the gains Indution kits and costs

[Anders_WR1]

What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

[SPIKE LIKE MIKE]

What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

[WR 1mposter]

What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards

[SPIKE LIKE MIKE]

What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards

And sidewaaaaaaaaaaaaaaaaaaaaaaaaaaaaays

[WR 1mposter]

What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards

And sidewaaaaaaaaaaaaaaaaaaaaaaaaaaaaays

Into tyre wall

[SPIKE LIKE MIKE]

What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards

And sidewaaaaaaaaaaaaaaaaaaaaaaaaaaaaays

Into tyre wall

Sideways/forwardie

[danr55]

been playing with maps this weekend spikey?

[SPIKE LIKE MIKE]

been playing with maps this weekend spikey?

NEXT service first

[danr55]

been playing with maps this weekend spikey?

NEXT service first

not long. how overdue are you ?!

[SPIKE LIKE MIKE]

been playing with maps this weekend spikey?

NEXT service first

not long. how overdue are you ?!

not too bad mate 400 at mo-not really used it much-been using a van at work and only did about 50 miles over last 2 weekends

[danr55]

bout the same as me, and have to go to a meeting tomoz and still get to ware on friday

[SPIKE LIKE MIKE]

bout the same as me, and have to go to a meeting tomoz and still get to ware on friday

No woriies they give you a good 500 either way mate

Mine was last serviced at 8500 so I aint too bothered

[Scooby Lee]

Laptop, Cable and ECUFlash are all sorted...

Basically, I'm in business!!