WR1 Owners Club

Posted: **Sat Jan 27, 2007 7:36 pm**

Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:
Spike "THE LEGEND" Mike XXX wrote:Anybody had any involvement? or know anybody who uses it?

All software is free to download from what I can see,you just need to buy a cable that runs between your ECU and laptop.

Been reading lots about it and it seems that most tuners"may"start using this software at a reduced rate to the ECUTEK mapping at 550 a pop!!!

I met up with some people at teh weekend and did some logging on teh evo-seems the "mapping" received is identical to the map somebody got at WRC!!! Basically just up the boost!!
The cars are also running VERY "rich"even after the "re-map"

No alterations to fuelling or the MIVEC where there are apparently alot of gains to be had. I was also advised that this is a better way of doing things and a boost controller is not essential as the current ECU can cope with dealing with the boost!!

The chap in question has downloaded maps from alot of vehicles including the latest 360 which is running 1.65-1.7bar boost!!

Apparently the MIVEC has been remapped on 360 to come on boost earlier and increase mid range torque!

The boost can be lowered to 1.3 to get the results we currently have @ 380bhp!! so therefore running 1.5bar should be able to see well up into the 400 figures!!! And so far NO issues!!!

Seems we are sold alot of items by tuners that are not essential,so that they can do very little work with the biggest financial rewards(i think we all knew this anyway).

Im very tempte to get the hardware/cables and have a good look into what I can do with the EVO.
Also availible for the scoob.

I will be chatting to the above fella a bit in the near future and I feel and will be trying to get my head around this before I attempt blowing up the EVO

I thought this was a WR1 forum, lol

I got my car mapped by Rich at Powerstation. I think it cost

Posted: **Sat Jan 27, 2007 8:09 pm**

Spike,

The laptop has arrived and I'm currently configuring it! (Norton Internet Security 2007 is being troublesome :roll:

)

For info:

I bought the 'universal' lead, which means I'll be able to 'plug-into' Subarus and Mitsubishis.

...Just awaiting delivery!

Lee.

Posted: **Sat Jan 27, 2007 8:15 pm**

Anders_WR1 wrote:
Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:
Spike "THE LEGEND" Mike XXX wrote:Anybody had any involvement? or know anybody who uses it?

All software is free to download from what I can see,you just need to buy a cable that runs between your ECU and laptop.

Been reading lots about it and it seems that most tuners"may"start using this software at a reduced rate to the ECUTEK mapping at 550 a pop!!!

I met up with some people at teh weekend and did some logging on teh evo-seems the "mapping" received is identical to the map somebody got at WRC!!! Basically just up the boost!!
The cars are also running VERY "rich"even after the "re-map"

No alterations to fuelling or the MIVEC where there are apparently alot of gains to be had. I was also advised that this is a better way of doing things and a boost controller is not essential as the current ECU can cope with dealing with the boost!!

The chap in question has downloaded maps from alot of vehicles including the latest 360 which is running 1.65-1.7bar boost!!

Apparently the MIVEC has been remapped on 360 to come on boost earlier and increase mid range torque!

The boost can be lowered to 1.3 to get the results we currently have @ 380bhp!! so therefore running 1.5bar should be able to see well up into the 400 figures!!! And so far NO issues!!!

Seems we are sold alot of items by tuners that are not essential,so that they can do very little work with the biggest financial rewards(i think we all knew this anyway).

Im very tempte to get the hardware/cables and have a good look into what I can do with the EVO.
Also availible for the scoob.

I will be chatting to the above fella a bit in the near future and I feel and will be trying to get my head around this before I attempt blowing up the EVO

I thought this was a WR1 forum, lol

I got my car mapped by Rich at Powerstation. I think it cost

Posted: **Sat Jan 27, 2007 8:17 pm**

Scooby Lee wrote:Spike,

The laptop has arrived and I'm currently configuring it! (Norton Internet Security 2007 is being troublesome )

For info:

I bought the 'universal' lead, which means I'll be able to 'plug-into' Subarus and Mitsubishis.

...Just awaiting delivery!

Lee.

Top bannana

I will be able to forward my maps to you next weekend if all goes well.

You can be "spikes engineer" and check them out for me

Will be interested to do a RR shortly after the maps also if anybody is interested.

I cut the side out of teh airbox today so I will give it a good beasting tommorow to see if there is any difference :wink:

Posted: **Sat Jan 27, 2007 8:30 pm**

Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve :mrgreen:

Posted: **Sat Jan 27, 2007 8:50 pm**

Anders_WR1 wrote:Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve

Thought so-Ive just cut a large hole in my airbox and hope to hear the Recirc DV when it re-circs-Also hoping for some induction noise

Posted: **Sat Jan 27, 2007 8:57 pm**

Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

Posted: **Sat Jan 27, 2007 9:00 pm**

Anders_WR1 wrote:Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

Only ever used WRC(silverstone) and Engine Advantages in Essex with the mitsi.

May pay a visit to WRC early march if you fancy it?

Posted: **Sat Jan 27, 2007 9:24 pm**

Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

Only ever used WRC(silverstone) and Engine Advantages in Essex with the mitsi.

May pay a visit to WRC early march if you fancy it?

WRC sounds good. Give us a PM with the date. I could ask a few mates as well? Various cars - Evo VI, S2000, GTI-R

Cheers

Anders

Posted: **Sat Jan 27, 2007 11:22 pm**

Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve

Thought so-Ive just cut a large hole in my airbox and hope to hear the Recirc DV when it re-circs-Also hoping for some induction noise

Let us know what difference this makes :wink:

Posted: **Sun Jan 28, 2007 1:58 pm**

danr55 wrote:
Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:Spike,

Yep, it's an airbox remover. Here's a picture:

http://www.nucleusnetworks.co.uk/scooby ... emover.jpg

It cost $45, delivery from the states cost $79!

It did nothing for power, but the turbo whistle sounds louder as does the re-circ dump valve

Thought so-Ive just cut a large hole in my airbox and hope to hear the Recirc DV when it re-circs-Also hoping for some induction noise

Let us know what difference this makes

Great induction noise-very like the APS induction on the scoob-not quite as loud! You get a nice swoooosh as it sucks adn sounds like its a VTA valve on lift off-I LIKE IT

Posted: **Sun Jan 28, 2007 1:59 pm**

Anders_WR1 wrote:
Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:Spike, where do you go for RR sessions? I want to see what my car scores somewhere other than Powerstation.

Anders

Only ever used WRC(silverstone) and Engine Advantages in Essex with the mitsi.

May pay a visit to WRC early march if you fancy it?

WRC sounds good. Give us a PM with the date. I could ask a few mates as well? Various cars - Evo VI, S2000, GTI-R

Cheers

Anders

Will put up in events....

Posted: **Sun Jan 28, 2007 3:18 pm**

Spike "THE LEGEND" Mike XXX wrote:Great induction noise-very like the APS induction on the scoob-not quite as loud! You get a nice swoooosh as it sucks adn sounds like its a VTA valve on lift off-I LIKE IT

Some pictures would be nice!

Posted: **Sun Jan 28, 2007 3:23 pm**

Scooby Lee wrote:
Spike "THE LEGEND" Mike XXX wrote:Great induction noise-very like the APS induction on the scoob-not quite as loud! You get a nice swoooosh as it sucks adn sounds like its a VTA valve on lift off-I LIKE IT

Some pictures would be nice!

Gimme 5 mate....

Posted: **Sun Jan 28, 2007 3:35 pm**

Not very clear but hopefully you get teh idea....

Only cut out on the wing side so that no hot air from rad etc gets in the box,Ive seen them with the hole cut ALOT larger....

Posted: **Sun Jan 28, 2007 3:40 pm**

Don't you have Auto-Focus! :lol:

Thanks...I must buy myself an airbox lid that I can modify without fear of making a serious error!

Posted: **Sun Jan 28, 2007 3:42 pm**

Scooby Lee wrote:Don't you have Auto-Focus!

Thanks...I must buy myself an airbox lid that I can modify without fear of making a serious error!

Dremmel - cant go wrong -

Or drill 3 holes to act as corners of triange and hand cut with a hack saw blade.
The likes of John banks have completely cut out the top of the lid . Apparently 80% of the gains Indution kits and costs

Posted: **Sun Jan 28, 2007 6:02 pm**

What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004? :toofunny:

Posted: **Sun Jan 28, 2007 6:10 pm**

Anders_WR1 wrote:What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

Posted: **Sun Jan 28, 2007 10:14 pm**

Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards :lol:

Posted: **Sun Jan 28, 2007 10:16 pm**

WR 1mpostor (aka number 1 moderator) wrote:
Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards

And sidewaaaaaaaaaaaaaaaaaaaaaaaaaaaaays :lol:

Posted: **Sun Jan 28, 2007 10:19 pm**

Spike "THE LEGEND" Mike XXX wrote:
WR 1mpostor (aka number 1 moderator) wrote:
Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards

And sidewaaaaaaaaaaaaaaaaaaaaaaaaaaaaays

Into tyre wall :oops:

Posted: **Sun Jan 28, 2007 10:21 pm**

WR 1mpostor (aka number 1 moderator) wrote:
Spike "THE LEGEND" Mike XXX wrote:
WR 1mpostor (aka number 1 moderator) wrote:
Spike "THE LEGEND" Mike XXX wrote:
Anders_WR1 wrote:What time zone you live in, it's light at 04:23!? and how did you manage time travel back to 2004?

My EVO is now a "time machine" see I told you th mod was "good"

So good infact it travels faster backwards

And sidewaaaaaaaaaaaaaaaaaaaaaaaaaaaaays

Into tyre wall

Sideways/forwardie :shock:

Posted: **Sun Jan 28, 2007 11:07 pm**

been playing with maps this weekend spikey? :lol:

Posted: **Mon Jan 29, 2007 7:28 pm**

danr55 wrote:been playing with maps this weekend spikey?

NEXT service first

Posted: **Mon Jan 29, 2007 10:04 pm**

Spike "THE LEGEND" Mike XXX wrote:
danr55 wrote:been playing with maps this weekend spikey?

NEXT service first

not long. how overdue are you ?! :lol:

Posted: **Mon Jan 29, 2007 10:07 pm**

danr55 wrote:
Spike "THE LEGEND" Mike XXX wrote:
danr55 wrote:been playing with maps this weekend spikey?

NEXT service first

not long. how overdue are you ?!

not too bad mate 400 at mo-not really used it much-been using a van at work and only did about 50 miles over last 2 weekends

Posted: **Mon Jan 29, 2007 10:12 pm**

bout the same as me, and have to go to a meeting tomoz and still get to ware on friday :oops:

Posted: **Mon Jan 29, 2007 10:13 pm**

danr55 wrote:bout the same as me, and have to go to a meeting tomoz and still get to ware on friday

No woriies they give you a good 500 either way mate :wink:

Mine was last serviced at 8500 so I aint too bothered

Posted: **Tue Jan 30, 2007 10:42 pm**

Laptop, Cable and ECUFlash are all sorted...

Basically, I'm in business!!

WR1 Owners Club

ECUFLASH....

Re: ECUFLASH....

Re: ECUFLASH....