|
by 500tie » Thu Nov 12, 2009 4:49 pm
Does anybody know if i would be able to fit the above to my WRX300 which currently has the 5speed in it.
I know i would have to change the clutch and flywheel but i don't know if the actual gearbox would fit.
Any help is a aprecated
Sooty,
Needs a WR1 now his WRX300 is sold
Or a spec D
-
500tie
-
- Posts: 198
- Joined: Sat Jan 03, 2009 4:30 pm
- Location: Lyneham, Wilts
by Gee Wr1 » Thu Nov 12, 2009 6:44 pm
It should fit as they are the same car more or less, same engine block same chassis so should swap ok. You might need to change your front & rear diffs though as i'm sure the sti's are different to wrx's.
Best person on here to ask is WUZ as he does these kinda swaps & mods & has far more knowledge than i ever will about what fits what when it comes to scoobs. Drop him a pm & ask.
-
Gee Wr1
-
- Posts: 1965
- Joined: Thu Sep 30, 2004 6:29 pm
- Location: The original Highlands Wr1
by 500tie » Thu Nov 12, 2009 7:25 pm
Nice one thanks gee
Sooty,
Needs a WR1 now his WRX300 is sold
Or a spec D
-
500tie
-
- Posts: 198
- Joined: Sat Jan 03, 2009 4:30 pm
- Location: Lyneham, Wilts
by WUZ » Thu Nov 12, 2009 11:08 pm
PM returned..
Forgot to say that if the DCCD box is 2006 - and is a UK box.... you'll be fine
-
WUZ
-
- Posts: 71
- Joined: Thu Jun 25, 2009 4:45 pm
by asperformance » Sat Nov 14, 2009 9:42 am
you would obviously have to fit some form of control for the DCCD as the WRX doesn't have anything as std.............
-
asperformance
-
- Posts: 587
- Joined: Wed Jun 24, 2009 10:40 am
- Location: north east
-
by The Swede » Sat Nov 14, 2009 11:36 am
asperformance wrote:you would obviously have to fit some form of control for the DCCD as the WRX doesn't have anything as std.............
Is there no cut out in the trim to fit the button?
If there isn't one, then swap the console for one of an STi.
-
The Swede
- Moderator
-
- Posts: 9153
- Joined: Sat May 07, 2005 12:55 pm
- Location: Azerbaijan
by 500tie » Sat Nov 14, 2009 12:12 pm
yea ive got the interior from a hawkeye in mine and it had the 2 spaces by the handbrake for the switches so thats not a problem, all i have to do is find someone to fit one for me oh yea i need to buy one too.
Sooty,
Needs a WR1 now his WRX300 is sold
Or a spec D
-
500tie
-
- Posts: 198
- Joined: Sat Jan 03, 2009 4:30 pm
- Location: Lyneham, Wilts
by asperformance » Thu Nov 19, 2009 2:31 pm
The Swede wrote:asperformance wrote:you would obviously have to fit some form of control for the DCCD as the WRX doesn't have anything as std.............
Is there no cut out in the trim to fit the button? If there isn't one, then swap the console for one of an STi.
no what i meant was you would need all the electronic control incl. buttons, not just somewhere to put the switch inside........................
-
asperformance
-
- Posts: 587
- Joined: Wed Jun 24, 2009 10:40 am
- Location: north east
-
by WR1 Bro » Thu Nov 19, 2009 2:43 pm
Classic Swede moment.
-
WR1 Bro
- Site Admin
-
- Posts: 20279
- Joined: Thu Aug 19, 2004 8:54 am
- Location: If skinny, ugly and Scouse was best, then JohnMc would be a porn star legend.
by Autotecnica » Thu Nov 19, 2009 5:01 pm
wire up a classic dccd controller or better option would be buying a neetroninics dccd controller.
you will have to have a 6 speed prop and a 180 rear diff, clutch flywheel possibly starter motor, linkage and knob!
lots of subaru breakers sell kits, around £2000-£2500 for the kit.
non dccd between £1500-£1800.
Buxton Subaru Centre. 01298 27391
-
Autotecnica
-
- Posts: 274
- Joined: Sat Jun 21, 2008 7:28 pm
- Location: Buxton
by WUZ » Thu Nov 19, 2009 9:15 pm
5-Speed Flywheel and starter motor will retro-fit into the 6-speed box.
-
WUZ
-
- Posts: 71
- Joined: Thu Jun 25, 2009 4:45 pm
| |