Users browsing this forum: No registered users and 3 guests
| |||||
Moderators: WR 1mposter, The Swede, Megaman, danr55, WR1 Bro
Rear anti roll bar bush diameter?!!!!Could anyone advise on the diameter of the rear anti roll bar on the wr1? I am getting them changed due to a bit of movement by my local Subaru parts upgrade centre (Scoobyparts) are listing two in the whiteline list 19mm and 20mm, any ideas please peeps would but great!
Personally I would just go for 24mm ARB whiteline up grade.
With the reinforced mounting bracket. You'll be surprised at the difference in handling.
I've just been under the car with a digital vernier gauge and it read 19.2mm. Could you explain how the 24mm one fits then please, I'm not especially mechanically minded lol
You obviously have to change all the brackets and bushes.
If you go for the 24mm upgrade you can buy the kit. In my opinion its about the cheapest and best value upgrade.
Whiteline upgrade options would normally be 22mm or 24mm and as above they come complete with a "fitting kit" to allow it to mount where the std bar was..........
if you need any w/line components we normally offer an owners discount deal alyn ASPerformance
PFC BRAKES, PAGID, MOTUL, FERODO, BREMBO, SPEEDLINE, TRS, MINTEX, PIAA, HELLA online shop!!
| ||
Who is onlineUsers browsing this forum: No registered users and 3 guests |
||