WR1 Owners Club

I fancy getting some new discs, after some cross drilled and / or grooved, if l'm honest its for the look rather than needing them.

Don't want to change calipers or anything.
any recommendations ?
and where I can get some for decent price

Just fitted turbo groove discs all round, plus red stuff matching pads. Fantastic, can't believe the difference. Got from Osaka

Try "godspeed engineering" aswell

I got drilled/grooed with redstuffs - did 2 trackdays and probably 9k miles the pads were only recently changed with no problems of "eating" the discs or lasting only a few k miles

might be worth trying a performance friction upgrade. a few of us have this on the evos, uses the brembo calipers and seems to work very well

danr55 wrote:might be worth trying a performance friction upgrade. a few of us have this on the evos, uses the brembo calipers and seems to work very well

Good call- i beleive they have now started doing a scoob disc

I've got the TurboGroove discs all round with Red Stuff Ceramic pads and the difference is noticable. I also upgraded the brake fluid to AP Racing dot 5.1.

I'm considering trying Ferrodo DS2500's next time I fit new discs, as the RedStuff's seem to chew the disc up pretty bad, although they do stop you well. I go through two sets of pads to one disc.

Anyone else running DS2500's on TurboGroove discs?

Cheers

Anders

danr55 wrote:might be worth trying a performance friction upgrade. a few of us have this on the evos, uses the brembo calipers and seems to work very well

Had them fitted about 3 weeks ago
I`m impressed!

zimmerman wrote:

danr55 wrote:might be worth trying a performance friction upgrade. a few of us have this on the evos, uses the brembo calipers and seems to work very well

Had them fitted about 3 weeks ago
I`m impressed!

PICTURES? a bit of a beast you are building now Bob

Spike "THE LEGEND" Mike XXX wrote:

zimmerman wrote:

danr55 wrote:might be worth trying a performance friction upgrade. a few of us have this on the evos, uses the brembo calipers and seems to work very well

Had them fitted about 3 weeks ago
I`m impressed!

PICTURES? a bit of a beast you are building now Bob

I`ii take my camrea with me when I go to wrc-tech on the 5th Mar. They are fitting Gofasterstripes.
Doug
PS Who is Bob?

zimmerman wrote:

Spike "THE LEGEND" Mike XXX wrote:

zimmerman wrote:

danr55 wrote:might be worth trying a performance friction upgrade. a few of us have this on the evos, uses the brembo calipers and seems to work very well

Had them fitted about 3 weeks ago
I`m impressed!

PICTURES? a bit of a beast you are building now Bob

I`ii take my camrea with me when I go to wrc-tech on the 5th Mar. They are fitting Gofasterstripes.
Doug
PS Who is Bob?

PMSL- sorry Doug!! losing the plot

So what goodies are WRC fitting for you?

APS Topmount
APS Cold air Induction
Apexi AVC-R
Remap

gonna talk to Alan this week about a 3 1/2" exhaust

zimmerman wrote:APS Topmount
APS Cold air Induction
Apexi AVC-R
Remap

gonna talk to Alan this week about a 3 1/2" exhaust

what boost you gonna run with the AVC-R?

Allan says 1.65 - 1.7 is safe with a stock bottom end

zimmerman wrote:Allan says 1.65 - 1.7 is safe with a stock bottom end

Is the boost controller to change from a norm to 1.7 then when on "spirited" driving? Should see over the 350bhp fig

Most on here did'nt run that much boost or a controller - max boost being 1.6"tops" with the odd spike in lower gears to 1.65 from memory slowly tailing off to 1.4.