WR1 Owners Club

Just wondering, as would like to know how to check what temp my intercooler spray's kicking in at.

The intercooler spray isn't automatic unfortunately as it isn't controlled by the ECU like with a Spec C.

Hi mate its not done on temp its done on boost pressure I think I set it up to start spraying at around 1bar you can adjust it in settings under heading of water injection, (note to others this has to be wired up to the back of the psi unit which I did when fitting the psi unit it wont automaticaly work just by fitting a psi unit)

Brilliant, what a stroke of luck you were online mate cheers, will check it out.

Wr1 bro thanks bud, I should have realised Ant did actually tell me long ago that he had done it as an extra.

WR1 Bro wrote:The intercooler spray isn't automatic unfortunately as it isn't controlled by the ECU like with a Spec C.

Hi mate he's reffering to the psi3 data monitor that has the facility to control a water injection system or water spray via a relay in the case of my WR1 (now bbigman2000's WR1) I conected it to the back of the water spray switch.

I see... So your WR1 isn't as standard as you say!

WR1 Bro wrote:I see... So your WR1 isn't as standard as you say!

LOL was going to take out the psi3 unit and sell seperately but bigman drove such a hard bargin I had to give it away with the car LOL,

Bigman I just looked at karl's website and he now has a pic of your WR1 sitting on his trailer outside my house.

http://www.carlogistics.co.uk/images/ga ... /cl-60.jpg

Slightly off topic... do you view the car before purchasing it?

I've got the psi3 monitor, I knew you could get the waterspray working though it, but what do you have to do to get it operational ?

Are either of your Psi3's mounted in a dash pod where clock is ?
I'm after a decent pic of what it looks like there rather than below a single din ice unit.

robwils wrote:Are either of your Psi3's mounted in a dash pod where clock is ?
I'm after a decent pic of what it looks like there rather than below a single din ice unit.

Got mine below the single din Alpine and defi'd above.

And here's a picture of mine.

Kev ...you brought another one ?

What was the difference, if any ?

Negative LCD and that's it Martin.

I'd love the new one that's just come out show things like the Advance Multiplier and other interesting info. No money through.

Think I'll go for the DEFI's they look excellent !

robwils wrote:Think I'll go for the DEFI's they look excellent !

Its the only way

Anybody know a good place to get them fitted up in N East ?

robwils wrote:Anybody know a good place to get them fitted up in N East ?

Tein are the importers for defi's so try one in the link below that suits you

http://www.tein.co.uk/dealer_list/fdindex.html

Envy, Revolution, or The Racing Line look the best options !

Wr1 Bro,

No I didnt view it before I bought it, Ant and I bargained over the deal for must have been 2-3 weeks, and I admit I stretched his good nature asking for pics of just about everything under the sun.

Obviously Ant being a member here from Day 1 of ownership etc all played a part, it is not something I would generally do, but the car arrived 100% as good as I expected, and I am a very happy man.

Ant thanks for that mate, superb, il add that one to my files, the pics albums just keep growing Top bloke karl was, and I'l use him again no doubt

My Ps3 is located in the double din slot on the bottom aswell with alpine head unit above, all installed by Ant