WR1 Owners Club

Posted: **Mon Sep 17, 2007 2:22 pm**

I'v noticed a couple of times when I have the diff set to locked, that when I'm reversing or the have the steering on full lock, and slowly turning that there is a lot of clicking and an almost crunching noise coming from the car. Is this normal?

Posted: **Mon Sep 17, 2007 2:28 pm**

yes - entirely normal

why have you got it set to lock?

Either leave it on auto or fully wound back.

Posted: **Mon Sep 17, 2007 2:32 pm**

Even in the fully wound back position you still get clunking a low speed tight turns as the diff locks itself.

If you pull the handbrake on just enough to light the warning light on the dash it usually frees up the diff from locking :wink:

Or just switch it back to auto when reversing/maneouvering.

Posted: **Mon Sep 17, 2007 3:06 pm**

had her on the quarter mile. rain was bouncing off the tarmac. these things are a nightmare to launch in the rain. had 3 rubbish runs then went home with tail between legs.

Glad this is normal as I was really panicking!!

thanks guys

WR1 Owners Club

DCCD

DCCD